Eldon - nVent Hoffman MCDS Stainless steel combinable version, double door enclosure

Description

The stainless steel double door combinable floor standing enclosure range, MCDS, is ideal for installation in confined spaces where a single door, when opened, would take up too much space in front of the enclosure. The doors' loading capacity also increases as it is divided over two doors. With a IP 55 protection degree, components inside the enclosure are well protected and makes it well suited for almost any environment, grade dependent.

DNV-GLEACGOSTKema Keur - DEKRALloyd's RegistercULus_UL Listed

 
 

Material:

AISI 304L pre-grained stainless steel / AISI 316L. Frame: 1.5 mm. Door: 2 mm. Rear, roof and side panels: 1.5 mm. Bottom plates: 1.5 mm stainless steel. Mounting plate: 3 mm galvanized steel.

Frame:

Seam welded reversed open profiles with 25 mm hole pattern, according to DIN 43660.

Door:

Mounted with four hinges. Including door frame with 25 mm hole pattern. Doors cannot be reversed. Separate doors to be ordered for left hand door locking.

Rear panel:

Fitted by M6 torx screws. Standard facilities for rear door mounting. Split rear panels in 1600 mm wide enclosures.

Side panels:

Supplied as an accessory.

Roof panel:

Removable.

Lock:

Espagnolette 4-point locking system in the main door and 2-point locking system in the slave door. Standard double-bit lock with 3 mm insert. Standard inserts, cylinders, lift handles and T-handle are available as accessories.

Bottom plates:

Two piece bottom plate in 1200 mm width, with injected polyurethane gasket to ensure maximum sealing.

Mounting plate:

Double folded and adjustable in depth by steps of 25 mm, with the MPD02 accessory. Mounting plate is delivered, attached on the outside of the enclosure packaging.

Earthing:

All panels are earthed through their fittings and are equipped with a separate earthing stud.

Finish:

400 pre-grained stainless steel.

Protection:

Complies with IP 55 | TYPE 12, 13 | IK 10.

Mounting requirements:

Standard delivery ready for combined installation. For stand-alone installation, add side panels.

 
 

 

Technical Information

Item no. Description Height
(mm)
Width
(mm)
Depth
(mm)
Mounting Plate 
Height
(mm)
Mounting Plate 
Width
(mm)
Weight
(kg)
MCDS18105 Floor standing, 1800x1000x500 1800 1000 500 1694 894 153.00
MCDS18105-316 Floor standing, 1800x1000x500 1800 1000 500 1694 894 153.00
MCDS18125 Floor standing, 1800x1200x500 1800 1200 500 1694 1094 173.00
MCDS18125-316 Floor standing, 1800x1200x500 1800 1200 500 1694 1094 173.00
MCDS20126 Floor standing, 2000x1200x600 2000 1200 600 1894 1094 192.00
MCDS20126-316 Floor standing, 2000x1200x600 2000 1200 600 1894 1094 192.00