Eldon - nVent EKDS Stainless steel compact version, double door enclosure

Description

The stainless steel double door compact floor standing enclosure range, EKDS, with a IP 55 protection degree is ideal for installation in confined spaces where a single door. when opened, would take up too much space in front of the enclosure. The doors' loading capacity also increases as it is divided over two doors. With an IP 55 protection degree, components inside the enclosure are well protected and makes the it well suited for almost any environment, grade dependent.

CE Declaration of ConformityEACGOSTKema Keur - DEKRALloyd's RegistercULus_UL Listed

 IP 55 TYPE 12, 13 IK 10; IP 66 TYPE 4X (on request)

Material:

AISI 304L pre-grained stainless steel / AISI 316L. Body and removable rear panel: 1.5 mm. Door: 2 mm. Bottom Plates: 1.5 mm. Mounting plate: 3 mm.

Body:

One piece enclosure body. Integrated depth profiles with hole pattern allowing mounting plate adjustable in depth.

Door:

Surface mounted with 4 hinges including door frame with 25 mm hole pattern and earthing studs. Standard doors can not be reversed.

Rear panel:

Fitted by M6 torx screws. Standard facilities for rear door mounting. Split rear panels in 1600 mm wide enclosures.

Lock:

Espagnolette 4-point locking system in the main door and 2-point locking system in the slave door. Standard double-bit lock with 3 mm insert. Standard inserts, cylinders, lift handles and T-handles are available as accessories.

Bottom plates:

One piece bottom plate with injected polyurethane gasket to ensure maximum sealing.

Earthing:

Door is equipped with separate welded earthing studs and earthing to the frame can be accomplished by using the ECF.

Mounting plate:

Double folded and slides into position. Adjustable in depth by steps of 25 mm. Mounting plate is supplied, attached on the outside of the enclosure packaging. Fitted inside for 1600 mm wide enclosures. For 1600 mm wide, filler plate is included.

Finish:

400 pre-grained stainless steel.

Protection:

Double door version, complies with IP 55 | TYPE 12, 13 | IK 10. Individual doors with welded vertical divider, complies with IP 66 | TYPE 4X, 12 and 13 | IK 10.

Technical Information

Item no. Description Height
(mm)
Width
(mm)
Depth
(mm)
Mounting Plate 
Height
(mm)
Mounting Plate 
Width
(mm)
Weight
(kg)
EKDS12124 Floor standing, 1200x1200x400 1200 1200 400 1094 1094 120.00
EKDS12124-316 Floor standing, 1200x1200x400 1200 1200 400 1094 1094 120.00
EKDS16124 Floor standing, 1600x1200x400 1600 1200 400 1494 1094 148.00
EKDS16124-316 Floor standing, 1600x1200x400 1600 1200 400 1494 1094 148.00
EKDS18124 Floor standing, 1800x1200x400 1800 1200 400 1694 1094 165.00
EKDS18124-316 Floor standing, 1800x1200x400 1800 1200 400 1694 1094 165.00
EKDS18164 Floor standing, 1800x1600x400 1800 1600 400 1694 1494 216.00
EKDS18164-316 Floor standing, 1800x1600x400 1800 1600 400 1694 1494 216.00
EKDS20124 Floor standing, 2000x1200x400 2000 1200 400 1894 1094 181.00
EKDS20124-316 Floor standing, 2000x1200x400 2000 1200 400 1894 1094 181.00
EKDS20164 Floor standing, 2000x1600x400 2000 1600 400 1894 1494 235.00
EKDS20164-316 Floor standing, 2000x1600x400 2000 1600 400 1894 1494 235.00

*Individual doors with vertical divider version.

IP 66 | TYPE 4X 12, 13 | IK 10

Item no. Description Height
(mm)
Width
(mm)
Depth
(mm)
Mounting Plate 
Height
(mm)
Mounting Plate 
Width
(mm)
Weight
(kg)
EKDS12124-4X Floor standing, 1200x1200x400 1200 1200 400 1094 1094 120.00
EKDS16124-4X Floor standing, 1600x1200x400 1600 1200 400 1494 1094 120.00
EKDS18124-4X Floor standing, 1800x1200x400 1800 1200 400 1694 1094 151.90
EKDS18164-4X Floor standing, 1800x1600x400 1800 1600 400 1694 1494  
EKDS20124-4X Floor standing, 2000x1200x400 2000 1200 400 1894 1094  
EKDS20164-4X Floor standing, 2000x1600x400 2000 1600 400 1894 1494  

*Individual doors with vertical divider version.